Epoxy Metallic Systems
Pre-Order
Model: GE-10WFS
GE-10WFS is a two-component water-based epoxy with good substrate penetration, chemical resistance and abrasion resistance. GE-10WFS becomes tack-free about 3 hours after application and can support light traffic in as little as 6-12 hours.RECOMMENDED FOR: Recommended for priming or coating concrete..
$106.94
New
Model: GCF
GCF is a fast-setting, two-component polyurethane crack filler designed for structural concrete repair in industrial, commercial, and large-scale residential applications. Supplied in a cost-effective 1-gallon bulk kit, GCF offers contractor-grade performance at exceptional value, d..
$126.46
Model: GE-P
GE-P Universal Epoxy Patching Paste – 1 Gallon KitGE-P is a professional-grade, two-component epoxy patching paste engineered for a wide range of substrate repair and surface preparation needs. This gray, non-shrinking paste is designed for use in both fine crack repair and deep patching appli..
$111.30
Model: gp20-pigment
PACKAGING INFORMATION1 pintMIX RATIO:1 pint per 3 gallon kit of GP-20MIXING AND HANDLING:Kits of this product should be mixed in their entirety. Add GP-20 Pigment to part A of your GP-20 sealer. Mix part A and pigment with a mechanical mixer for 3 minutes at medium speed for pigment dispersal. Pour ..
$64.30
Model: gu30-pigment
Liquid Pigments for GU-30 Urethane SealerPACKAGING INFORMATION1 pintMIX RATIO:1 pint for 1 gallon of GU-30 High Solid High Wear Polyurethane Sealer with AggregateMIXING AND HANDLING:Kits of this product should be mixed in their entirety. Premix and add GU-30 Pigment to part A of GU-30. Mix par..
$47.79
Model: MSC
All 27 of our GlobMarble colors are displayed on this chain.
They are 2” x 3” big, and were poured with our GlobMarble GE-100 Floor Epoxy.
These colors include- Atlantis Green, Bark Brown, Blond, Brass, Bronze, Burnt
Orange, Champagne, Charcoal, Cooper Brown, Copper, Dark Cherry, Dark Purple, Dra..
$50.00
Model: TK-9030
Our fast set concrete crack repair is a rapid set, high strength, ultra-low viscosity urethane treatment material.This 2-part, 1:1 system is 100% solids, no VOC’s and designed for rebuilding spalls and treating static cracks in concrete very quickly.The Fast Set Concrete Repair Cartridge may be used..
$135.96
Hot
Model: SCR
Concrete Cleaner - Super Concrete Renovator From SureCrete Concrete Cleaner from SureCrete Design Products SCR - is a penetrating concentrated renovator for concrete and cement-based products. It quickly dissolves mortar, scale, rust, algae, stains, and mineral deposits such as effl..
$37.90
Model: GE-MVB
G Guard Concrete Moisture Barrier / Vapor Barrier GE-GVMB is a 2 component 100% solids epoxy seal coat designed to manage moisture / vapor emission rates up to 20 lb per 1000 SQFT prior to application of vinyl sheets, tiles, cement overlays, epoxy systems, terrazzo, wood veneers, carpet or pol..
$141.15
Hot
Model: MPL
Metallic Epoxy Pigment by GlobMarbleGlobMarble's Metallic Epoxy Pigments is an exciting new seamless flooring system that provides a unique three dimensional appearance with suspended reflective pigments.Due to the vast options offered within the metallic epoxy system, Metallic Pigments for Epoxy..
$40.00
Model: DK 400SB GLOSS
Solvent Based Polyurethane Clear Coat for Concrete High PerformancePolyurethane SB from SureCrete, For Interior use PolyurethaneHigh GlossPolyurethane Solvent Based Concrete Sealer is 2-component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior con..
$168.30
Hot
Model: GU-20
GlobMarble GU-20 is a commercial grade two-component polyester/aliphatic polyurethane coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability. This product meets the VOC requirements for the newly enacted VOC laws of New..
$171.55
Model: GU-30
GlobMarble GU-30 is a three-component, non-yellowing, high solids, aliphatic polyurethane floor sealer for concrete & cement-based overlays.GU-30 high solids polyurethane is ideal as a top finish coat on epoxy systems and concrete that exhibits excellent characteristics for abrasion resistance, ..
$159.46
Hot
Model: DK 400WB
Polyurethane Clear Coat For Concrete Water Based High Performance From SurecreteDura-Kote Polyurethane WB is a 2-component acrylic polyurethane (57% solids) formulated as a high performance non-yellowing clear coating for concrete, cement-based overlays, and also as a top finish coat on epoxy system..
$192.06
Model: GU-20W
GlobMarble GU-20W is a two-component, non-yellowing, high-gloss aliphatic polyurethane water-based floor sealer for concrete, cement-based overlays. GU-20W water-based polyurethane is ideal as a top finish coat on epoxy systems that exhibits excellent characteristics for abrasion resistance, c..
$179.95
Hot
Model: DK-120
High Gloss Clear Polyaspartic Floor Coating - Dura-Kote DK-120 from SureCrete DesignPolyaspartic Floor Sealer DK-120 is a specially formulated hybrid, solvent-based polyaspartic coating designed for: application over concrete or cement based flooring; as a topcoat for protecting epoxy flakes a..
$206.45
Model: GP-20-Fast Set
GlobMarble GP-20 is two component 85-90% solids aliphatic - high gloss polyaspartic sealer designed for application over interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. This material can be used as the base coat and the topcoat over paint chip decorative bro..
$199.46
Pre-Order
Model: GP-20 Slow Set
GlobMarble GP-20 is two component 85-90% solids aliphatic - high gloss polyaspartic sealer designed for application over interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. This material can be used as the base coat and the topcoat over paint chip decorative bro..
$180.00
Model: WB-PIGMENTED-SEALER
Water-Based Clear Epoxy Coat 2-Gal kit, Primer and Sealer for Interior ConcreteDK 600WB is a two-component, 85% solids floor coating for interior concrete and cement- based overlays. The high performance clear top coat, provides the durability of a solvent base system with the ease and safety ..
$108.95
Model: GE-C10W
GE-C10W is a water-based concrete floor epoxy coating that is available in 10 pigmented colors. Some of the colors include Black, green, blue, red, gray, white, and many more color varieties are available. Any color that is needed can be customized for this product. DescriptionThis product is 2..
$71.38
Hot
Model: GE-100
GE-100 Epoxy — 100% Solids, UV-Resistant FormulaGE-100 is a professional-grade, 100% solids epoxy floor coating for metallic epoxy floors, solid-color epoxy systems, epoxy flake systems, and decorative chip/quartz builds. Its advanced formulation provides excellent UV resistance with reduced yell..
$118.40
-320x320w.jpg "Pigments For Epoxy Floor Coating GE-100")
Hot
Model: GE-100P
Liquid Pigments for GlobMarble GE-100 Epoxy 100% .PACKAGING INFORMATION 1 quartMIX RATIO:1 quart for 3 gallon kit of GE-100 Epoxy Clear MIXING AND HANDLING: Kits of t..
$44.02
Model: GE-10W
GE-10W is a high-performance clear water-based top coat floor epoxy with low VOC. GE-10W is a 2 component 53% (colors); 45% (clear) solids floor epoxy coat for cement-based overlays and interior concrete. GE-10W is used as a top or base coat, this product can withstand exposure to many solvent based..
$59.57
Model: ColorTec 500
Pigmented Epoxy Floor Coating 100% Solids From SureCrete (3-Gal Kit)ColorTec 500 Pigmented Epoxy Floor Coating is a 2 component 100% solids, zero VOC epoxy floor coating system that is used in a wide variety of applications: as a high build color coat for a different decorative concrete systems, ..
$444.10
Model: GE-C100
GlobMarble GE-C100 is two component 100% solids epoxy pigmented seal coat
that is used for applications where a thick build solid color floor topcoat is
needed or as a primer coat for decorative
concrete systems: flakes and metallic epoxy.
Standard colors are available in: White,
off white, l..
$115.20
Model: TARBENDER
Tarbender is a clear liquid epoxy that can be poured or brushed over a variety of surfaces to provide a strong, high gloss coating. It can be applied over wood, plaster, concrete, foam, fabrics, paper, etc. can be used to encapsulate 2-D or 3-D objects. Tarbender™ is certified “aquarium sa..
$43.00
Model: FINISH
Surefinish – Mop On Floor Wax For Slip Resistance And ProtectionBeautifies, enhances and protects hard surface interior floors.SureFinish is an industrial floor finish (Wax) which provides exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It’s ..
$84.95
Showing 1 to 27 of 27 (1 Pages)