GP-20 Polyaspartic Sealer Pigment
PACKAGING INFORMATION
1 pint
MIX RATIO:
1 pint per 3 gallon kit of GP-20
MIXING AND HANDLING:
Kits of this product should be mixed in their entirety. Add GP-20 Pigment to part A of your GP-20 sealer. Mix part A and pigment with a mechanical mixer for 3 minutes at medium speed for pigment dispersal. Pour part B of your sealer in to part A and mix with mechanical mixer with medium speed for 3 minutes. Then you are ready to roll your sealer onto the floor. If using partial kits, refer to the technical data instructions for this product for proper weight mix ratios.
Pigmented sealers may be applied for decorative concrete jobs, restrooms, warehouses, kitchens, and any other areas where a high strength pigmented sealer is needed.
How to Install a Flake Floor IN ONE DAY
Flake floors are traditionally installed using epoxy, and this requires you to wait overnight for th..
