The SM 7000 Non-Slip Keystone Paver Concrete Stamp creates the look of interlocking Keystone Pavers with a rough, grippy texture designed for better traction. Unlike traditional natural-stone stamps, which often have smoother areas between ridges and stone details, SM 7000 has a consistent slip-resistant texture covering the entire surface of every paver.

Although the texture is coarse, it isn't sharp or uncomfortable to walk on barefoot. This makes it an excellent choice for pool decks, patios, and residential walkways, as well as driveways, public sidewalks, commercial entrances, and other high-traffic areas where good traction is important.

Product Specifications

Pattern Type: Non-Slip Keystone Paver
Stamp Size: 31" × 21"
Pattern Layout: 12 Keystone Pavers per stamp impression
Paver Design: Each Keystone Paver consists of one 6" × 6" hexagonal stone and one 4" × 4" square stone
Material: Durable polyurethane rubber
Stamp Options: Rigid with handles and Flexible without handles
Matching Touch-Up Skin: SKM 7000, approximately 12" × 12"

Available Sets

Concrete Stamps SM 7000 – 5 Piece Set

3 – Rigid Stamps with handles
1 – Flexible Stamp without handles
1 – Matching Non-Slip Texture Skin SKM 7000

Concrete Stamps SM 7000 – 9 Piece Set

7 – Rigid Stamps with handles
1 – Flexible Stamp without handles
1 – Matching Non-Slip Texture Skin SKM 7000

SM 7000 Technical Data Chart

MODEL:	SM 7000
Recommended Touch Up Wheel:	Flat 1/4" Smooth
Grout Line Width:	1/2"
Grout Line Depth:	1/4"
Recommended Overlay Thickness:	3/8"
Permitted Rotation:	180°
All measurements are approximate and may vary by measurement method and manufacturing tolerances. Minor dimensional variations that do not affect product performance are not considered defects and are not covered under warranty.

RIGID Stamp Mat

The Rigid SM 7000 Stamp Mat is sturdy enough to stand on during stamping and features handles for easy lifting and repositioning. Rigid mats are used to stamp the majority of the concrete surface and interlock to maintain consistent grout-line alignment.

FLEX Stamp Mat

The Flexible SM 7000 Stamp Mat is made from more flexible urethane and has no handles. It bends to accommodate slab edges, walls, corners, steps, and other areas where rigid stamps cannot fit.

Matching Non-Slip Texture Skin – SKM 7000

The SKM 7000 Texture Skin features the same grippy texture as the main stamps. It is used along form walls, edges, and other difficult areas to prevent bald spots or incomplete texture impressions. Touch-up wheels and detail chisels can then be used to connect and refine grout lines.

Residential Applications

SM 7000 is an excellent choice for residential concrete projects where a decorative paver appearance and slip-resistant surface are desired.

Common applications include driveways, patios, pool decks, poolside walkways, front entrances, sidewalks, garden paths, and outdoor living spaces.

Its barefoot-friendly texture makes it particularly attractive for swimming pool surrounds, where a rough-textured surface can provide additional traction without the discomfort associated with sharp or abrasive finishes.

Commercial and Municipal Applications

The high-traction Keystone Paver texture is also well suited for commercial and municipal concrete projects, including public sidewalks, storefront entrances, shopping areas, pedestrian walkways, parks, commercial driveways, and high-foot-traffic outdoor spaces.

The pattern provides the appearance of individual paving stones while allowing contractors to create a continuous stamped concrete surface.

For public projects, contractors should verify applicable local surface-performance and accessibility requirements.

Government purchasers: GlobMarble is registered in SAM.gov.

SM 7000 Stamp Placement Instructions

SM 7000 stamps interlock like puzzle pieces. Start with a straight first row, fitting each stamp directly against the previous one.

Stagger each subsequent row so that each stamp falls approximately halfway between two stamps in the previous row. This prevents continuous stamp joints and helps avoid concrete squeeze-up lines, gaps, and alignment problems.

Stamps may be rotated 180°, although rotation is optional because the pattern connects correctly in either direction.

Before stamping, dry-fit several mats on the ground so the entire crew understands the interlocking layout.

Frequently Asked Questions About Non-Slip Keystone Paver Concrete Stamps

Q: What makes SM 7000 a non-slip concrete stamp?

A: SM 7000 features GlobMarble's grippiest concrete stamp texture, specifically designed to provide traction across the entire paver surface. Traditional natural-stone stamps reproduce natural stone textures, including ridges, variations, and smoother sections. SM 7000 instead uses a consistent, coarse-textured finish specifically developed for slip resistance. Despite its pronounced texture, the surface is not sharp or excessively abrasive, making it comfortable to walk on barefoot.

Q: What is the Keystone Paver stamped concrete pattern?

A: Each SM 7000 stamp creates an impression of 12 interlocking Non-Slip Keystone Pavers, each consisting of a 6" × 6" hexagonal stone and a 4" × 4" square stone. The stamps fit together to form a continuous paver pattern with consistent grout lines and a grippy, slip-resistant texture.

Q: Is non-slip stamped concrete slippery when wet?

A: SM 7000 features our grippiest stamp texture, designed to provide maximum surface traction. Unlike traditional natural-stone stamp patterns, which often contain smoother areas, SM 7000 maintains a consistent, rough-textured finish across the entire paver surface. When compared under identical conditions using the same concrete sealer, SM 7000 is designed to provide significantly better grip than conventional stone-textured stamps. For maximum traction, particularly around swimming pools and frequently wet surfaces, we recommend combining the non-slip stamped texture with a compatible slip-resistant sealer additive. Actual slip resistance depends on surface conditions, moisture, sealer selection, and the use of traction additives.

Q: Can SM 7000 be used for commercial sidewalks and high-traffic areas?

A: Yes. SM 7000 is designed for residential and commercial concrete applications where additional surface traction is desirable. Its rough, grippy texture makes it particularly suitable for commercial sidewalks, storefront entrances, pedestrian walkways, shopping areas, public pathways, and other high-traffic outdoor surfaces. For municipal or public projects, contractors should verify that the finished surface meets applicable local requirements.

Q: Can SM 7000 be used on freshly poured concrete and concrete overlays?

A: Yes. SM 7000 can be used on freshly poured concrete and compatible stampable concrete overlays. For concrete overlay applications, the recommended overlay thickness is approximately 3/8".

Q: How many concrete stamps do I need for my project?

A: We recommend enough stamps to cover the entire width of your slab, plus two additional stamps. This is the recommended minimum to keep the stamps properly interlocked like puzzle pieces and prevent gaps or misaligned grout lines from getting progressively worse as you work across the slab. The connected stamps also form a working "raft," giving your crew room to reposition mats, tamp, apply release agents, and complete touch-ups. Larger projects benefit from more stamps. Using fewer is possible, but makes the process significantly slower and more difficult, especially for beginners.

Q: How to use SM 7000 Keystone Paver Stamps?

A: SM 7000 stamps interlock like puzzle pieces. Begin with a straight first row, fitting each stamp against the previous one. Stagger subsequent rows to prevent the stamp joints from forming long, continuous lines. The stamps can also be rotated 180°, although rotation is optional because the pattern remains continuous in either orientation. We recommend dry-fitting several stamps before beginning to familiarize your crew with the layout.

Q: Are SM 7000 non-slip concrete stamps suitable for pool decks?

A: Yes. SM 7000 is designed to create a rough, high-traction concrete surface without sharp or excessively abrasive texture. Its grippy Keystone Paver finish is comfortable for barefoot walking, making it an excellent decorative option for residential pool decks, poolside walkways, patios, and other outdoor barefoot areas. For swimming pool applications, selecting an appropriate concrete sealer is particularly important. A compatible non-slip sealer additive can provide additional traction when the surface is wet.

Q: Does sealing affect the slip resistance of stamped concrete?

A: Yes. Concrete sealers can influence the traction characteristics of a stamped surface. The type of sealer, application thickness, and finish can all affect how slippery the concrete becomes, particularly when wet. Heavy applications of certain glossy sealers may reduce surface grip. For areas where additional traction is important, we recommend using a compatible non-slip sealer additive to complement the rough-textured finish created by SM 7000.

Shipping:
Processing time: 1–2 business days.
Carriers: UPS & FedEx.
Worldwide shipping from Brooklyn, NY.

Returns:
30-day return policy for unused items.
Money-back guarantee if the product is defective.
Customer pays for return shipping unless the item is damaged.