Castle Stone Mold CS 3001

Castle Stone Mold CS 3001

Rubber molds have the abrasion resistance and tear strength needed to keep production moving. Casting concrete into rubber molds lets you make perfect copies of any original every time! Molds are ready for casting same day and last in production...saving you time, labor, and material costs. Urethane molds are used everyday by professionals to make architectural elements, concrete stone veneer, formliners, concrete countertops, GFRC panels, concrete statues and furniture and the list goes on. These molds can be used over and over.


Castle Stone Mold CS 3001/1


Mold size 4.66 SQ.FT(0.43m2) approximate.
Measurements - 28" X 24" X 2 1/2" (71cm X 61cm X 6cm)
Mold's sections — 14.
Section dimensions:  1 1/2" to 2" (4-5cm) thick and the individual sizes
from 12" x 6"  (30cm X 15cm) largest
to 2 1/4" X 2 1/4" (6cm X 6cm) smallest.   


Castle Stone Mold CS 3001/2


Mold size 4 SQ.FT(0.37m2) approximate.
Measurements - 24" X 24" X 2 1/2" (61cm X 61cm X 6cm)
Mold's Sections — 8.

Section dimensions: 2 1/4" (5.7cm) thick

The individual sizes are:  7 1/2"x 5"(19cm x 12.7cm), 7"x 4 1/2"(17.8cm x 11.4cm),

8"x 6"(20.3cm x 15.2cm), 8"x 6"(20.3cm x15.2cm), 13"x 6"(33cm x 15.2cm),

13 1/2"x 6"(34cm x 15.2cm),14"x 4"(35.5cm x 10cm),14"x 4"(35.5cm x 10cm)


Castle Stone Mold CS 3001/3


Mold size 4 SQ.FT(0.37m2) approximate.
Measurements - 24" X 24" X 2 1/2" (61cm X 61cm X 6cm)
Mold's Sections — 11.

Section dimensions: 2 1/4" (5.7cm) thick

The individual sizes are:  8"x3"(20cm x 7.6cm), 8.5"x3"(21.6cm x 7.6m),

8"x 3"(20cm x 7.6cm)8"x 3"(20cm x 7.6cm)8" x 4"(20cm x 10.6cm)8"x 3"(20cm x 7.6cm)

13"x 4"(33cm x 10cm),13"x 4"(33cm x 10cm),13"x 4"(33cm x 10cm), 13"x 4"(33cm x 10cm)

13"x 3"(33cm x 7.6cm)


Castle Stone Mold CS 3001/4


Mold size 4 SQ.FT(0.37m2) approximately.
Measurements - 24" X 24" X 2 1/2" (61cm X 61cm X 6cm)
Mold's Sections — 10.

Section dimensions: 2 1/4" (5.7cm) thick- approximately

The individual sizes are:  7"x 6"(17.5cm x 15cm), 7"x 6"(17.5cm x 15cm),

7"x 3"(18cm x 7.6cm), 7"x 2"(18cm x 5cm)7"x 3"(18cm x 7.6cm), 14 1/2"x 3"(37cm x 7.6cm)

14 1/2"x 3"(37cm x 7.6cm),14"x 4"(35.5cm x 10cm),14"x 5"(35.5cm x 12.5cm), 14"x 4"(35.5cm x 10cm)


Castle Stone Mold CS 3001/5


Mold size 4 SQ.FT(0.37m2) approximately.
Measurements - 24" X 24" X 2 1/2" (61cm X 61cm X 6cm)
Mold's Sections — 10.

Section dimensions: 2 1/4" (5.7cm) thick- approximately

The individual sizes are:  10 1/2"x 4"(27cm x 10cm), 10"x 6"(25.5cm x 15cm),

10 1/2"x 5"(27cm x 12.5cm)10 1/2"x 5"(27cm x 12.5cm), 11"x 5"(28cm x 12.5cm), 11"x4"(28cm x 10cm)

10 1/2"x 2"(26cm x 5cm)9 1/2"x 3"(23.5cm x 7.5cm)10" x 3"(25.5cm x 7.5cm), 10"x4 1/2"(25.5cm x 11cm)


Castle Stone Mold CS 3001/6


Mold size 4 SQ.FT(0.37m2) approximately.
Measurements - 24" X 24" X 2 1/2" (61cm X 61cm X 6cm)
Mold's Sections — 11.

Section dimensions: 2 1/4" (5.7cm) thick- approximately

The individual sizes are:  6"x 10"(15cm x 25.5cm), 10"x 5 1/4"(25.5cm x 13cm),

9 1/2"x5"(24cm x 12.5cm)9 1/2"x 4"(24cm x 10m), 9 1/2"x 3"(23cm x 7.5cm), 10"x 3"(25.5cm x 7.5cm)

10"x 3"(25.5cm x 7.5cm)10"x2 1/2"(25.5cm x 6cm)12"x2 1/2"(35cm x 6cm), 12"x 4 1/2"(35cm x 11cm)

12"x 4"(35cm x 10cm)


Castle Stone Mold CS 3001/7 Corner


Measurements - 24 1/2" X 10 1/2" X 6 1/2" (62cm X 27cm X 6.5cm)

Mold's Sections — 4.

Section dimensions:  6" x 9" x 5" (15 cm x 23cm x 13cm), 4" x 9" x 5" (10cm x 23cm x 13 cm), 5" x 9" x 4 1/2" (13cm x 23cm x 11 cm), 6" x 9" x 5" (15cm x 23cm x 13 cm).


Castle Stone Mold CS 3001/8 Corner

Measurements -25 1/2" X 10 1/2" X 5 1/2" (65cm X 27cm X 14cm)

Mold's Sections — 6.

Section dimensions: 2 1/4" (5.7cm) thick- approximately

The individual sizes are: 4" x 9" x 4 1/2"(10cm x 23cm x 12cm), 4" x 9" x 4"(10cm x 23cm x 10 cm),

3" x 9" x 4 3/4" (8cm x 23cm x 12 cm), 2.5" x 9" x 4 1/2(6cm x 23cm x 12 cm), 2 1/2" x 9" x 4 1/2(6cm x 23cm x 12cm), 4" x 9" x 4 1/2" (10 cm x 23 cm x 12 cm)




CS 3001/1-3001/6  Stone-casting Instructions:

Always apply release agent to your mold prior to casting concrete.
CS 3001/2 mold casting weight is about 74.99 lbs. (34.05 kg.) *Weight varies by mold*
We use this 1:2 cement to filler ratio mix : (you can also mix 1-part Portland cement to 3 parts sand [filler], but plasticizer and water has to be re-calculated by cement weight)
25 lbs (11.35 kg) Portland cement (white for light stone colors, gray for dark stone colors)

49.99lbs (22.7kg) Sand (20-30 mesh recommended. Silica sand or "all-purpose" sand works great)
99.98 oz (2.72 L) Water (We recommend water to be 20%-30% of cement weight.) (If your mix is too liquid, use less water.)
4 oz (113.5 g) Super-plasticizer (Superplasticizer's dosage rate is 0.5% -1% of cement weight. We are using 1%)
For best result always add dry pigments to your mix prior to adding the water. Mix concrete with pigment and additives for a few minutes, then add water (mix at least 3-5 minutes). You can also add Super plasticizer to the water 10-15 minutes prior to casting, then mix with dry ingredients.
Please note: Concrete minimum mixing time is 3 minutes (it takes a few minutes until Super Plasticizer absorbs into the cement and start reaction)
To color different molds sections, brush oxide pigment over the  selected sections, then cast the concrete.
Cover the mold with plastic while it is curing. Remove the stone from the mold in 12-24 hours.


Title Castle Stone Mold CS 3001

5 Rating 1 Review

  • Product Code: CS 3001
  • Availability: In Stock
  • $289.00

Available Options

Concrete admixture-Water reducer-Super plasticizer High-performance superplasticizer for cement bas..
$17.00

CSA Cement Fast Setting Additive 50 Lbs   GlobMarble CSA Cement is a cementitious po..
$27.50

Concrete Oxide PigmentOxide Concrete Colors for Concrete. 1Lb-(0.45kg) Mix Ready bag. Photos of..
$5.30

Non-Aerosol Sprayer for Release AgentThe Non-Aerosol sprayer is an economical alternative to aeros..
$64.99

Concrete Countertop Molds Edge Form CEF 7010Concrete Countertop Molds Edge Forms are used ..
$45.00

Rubber molds for concrete paver stone   PAVER STONE RUBBER MOLDS   Application a..
$39.00

Paver stone molds PS 27042 Mold's (stone) thickness 2.36 inch ( 6 cm) Approximate Mold inside measu..
$14.99

Paver stone molds PS 24107R (rubber) Mold's (stone) thickness 2.36 inch ( 6 cm) Approximate mold me..
$27.00

Paver stone rubber mold   PS 21104   Mold's (stone) thickness 2.36 inch ( 6 cm) Approxima..
$23.00

Water-Based Concrete Stains-Eco-Stain  Semi-transparent Concrete Stains from SureCrete Semi-T..
$60.00

Color Pack for Decorative Concrete - Xtreme PreCast Mix - 0.5 lb (0.23 kg) from SureCreteConcre..
$3.95

Concrete Countertop Mold Edge Form CEF 7012 Concrete Countertop Mold Edge Forms are ..
$40.00

White Concrete PigmentTitanium Dioxide White Colors for Concrete.   SELECT COLO..
$7.99