One Day Epoxy Floor System
Regular epoxy flake floors require a two day application. One day for rolling the epoxy and throwing the flakes, and another day for scraping the excess flakes and applying your topcoat. Our one day flake floor system cuts the application time in half by removing the epoxy from the mix. Instead, it exclusively uses polyaspartic which has a much quicker cure time. The method is the exact same as epoxy flake applications aside from the need to work a little quicker.
Pre-Order
Model: GE-10WFS
GE-10WFS is a two-component water-based epoxy with good substrate penetration, chemical resistance and abrasion resistance. GE-10WFS becomes tack-free about 3 hours after application and can support light traffic in as little as 6-12 hours.RECOMMENDED FOR: Recommended for priming or coating concrete..
$106.94
Model: GE-P
GE-P Universal Epoxy Patching Paste – 1 Gallon KitGE-P is a professional-grade, two-component epoxy patching paste engineered for a wide range of substrate repair and surface preparation needs. This gray, non-shrinking paste is designed for use in both fine crack repair and deep patching appli..
$111.30
Model: gp20-pigment
PACKAGING INFORMATION1 pintMIX RATIO:1 pint per 3 gallon kit of GP-20MIXING AND HANDLING:Kits of this product should be mixed in their entirety. Add GP-20 Pigment to part A of your GP-20 sealer. Mix part A and pigment with a mechanical mixer for 3 minutes at medium speed for pigment dispersal. Pour ..
$64.30
Model: TK-9030
Our fast set concrete crack repair is a rapid set, high strength, ultra-low viscosity urethane treatment material.This 2-part, 1:1 system is 100% solids, no VOC’s and designed for rebuilding spalls and treating static cracks in concrete very quickly.The Fast Set Concrete Repair Cartridge may be used..
$135.96
Hot
Model: SCR
Concrete Cleaner - Super Concrete Renovator From SureCrete Concrete Cleaner from SureCrete Design Products SCR - is a penetrating concentrated renovator for concrete and cement-based products. It quickly dissolves mortar, scale, rust, algae, stains, and mineral deposits such as effl..
$37.90
Hot
Model: DK-120
High Gloss Clear Polyaspartic Floor Coating - Dura-Kote DK-120 from SureCrete DesignPolyaspartic Floor Sealer DK-120 is a specially formulated hybrid, solvent-based polyaspartic coating designed for: application over concrete or cement based flooring; as a topcoat for protecting epoxy flakes a..
$206.45
Model: GP-20-Fast Set
GlobMarble GP-20 is two component 85-90% solids aliphatic - high gloss polyaspartic sealer designed for application over interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. This material can be used as the base coat and the topcoat over paint chip decorative bro..
$199.46
Pre-Order
Model: GP-20 Slow Set
GlobMarble GP-20 is two component 85-90% solids aliphatic - high gloss polyaspartic sealer designed for application over interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. This material can be used as the base coat and the topcoat over paint chip decorative bro..
$180.00
Hot
Model: EF
Enhance your floors with GlobMarble 1/4" Epoxy Floor Flakes, the perfect broadcast media for both epoxy and polyaspartic coating systems. These decorative polymer vinyl flakes add visual texture, slip resistance, and professional-grade durability to garage floors, commercial spaces, and ind..
$25.00
Showing 1 to 9 of 9 (1 Pages)