Concrete Surface Delay Film. Liquid Surface Retarder For Stamping

Concrete Surface Delay Film. Liquid Surface Retarder For Stamping

Concrete Surface Delay from SureCrete Design 


Surface Delay or Surface Retarder is a transparent blue, soapy odor, non-hazardous, concentrated, film-forming solution that is designed to retard the initial evaporation of water from freshly placed concrete or stamp overlay during finishing operations.
Use this Liquid Concrete Retarder during stamping concrete works even if it is high wind, low humidity, high temperature or any combination. Surface Delay will help to Keep the cream finish of the surface of overlays or newly poured concrete surface moist for slowing the cure time.
Concrete can be placed with a lower slump, even under rapid drying conditions, helping to reduce related shrinkage cracking or surface checking by slowing initial evaporation of bleed water.
PACKAGING 1 gal (3.8 L) jugs 5 gal (18.9 L) pails
COVERAGE Approx. 200 - 400 ft² per gallon (4.9 - 9.8 m²/L


Write a review

Note: HTML is not translated!
    Bad           Good

  • Product Code: SUD1
  • Availability: In Stock
  • $55.00
STAMP CONCRETE OVERLAY A 3D FLOOR BAG MIX – SURESTAMP FROM SURECRETE SureCrete’s SureStamp is a sta..
$29.00

Concrete Stamp Rotating Mats SM 2100All SM 2100 series stamp mats are rotating a..
$115.00

Color Pack for Decorative Concrete - Xtreme PreCast Mix - 0.5 lb (0.23 kg) from SureCreteConcre..
$3.85

   PAVER STONE PLASTIC MOLDS  There are different mold models but it is the sam..
$14.99

Water-Based Concrete Stain-Eco-Stain Semi-transparent Concrete Stain from SureCrete (10 lb / 4...
$60.00

Concrete Oxide PigmentOxide Concrete Colors for Concrete. 1Lb-(0.45kg) Mix Ready bagSELECT COLOR TO ..
$5.30

Concrete Countertop Molds Edge Form CEF 7010Concrete Countertop Molds Edge Forms are used ..
$45.00

Stone Veneer Molds VS 101/1 Mold size — 3,34 SQ.FT(0.31m2). approximate.Measurements - 23” X 21..
$164.00