High Density Precast Concrete Foam Rails
High Density Precast Concrete Foam.
Decorative concrete high density foam rails that are coated on 1 side with a clear facing material. Use with PSA tape to adhere to any surface and eliminate the need for caulking.
GlobMarble’s concrete countertop foam rails- inexpensive and easy-to-use that no other solution to create a flawless countertop form in minutes. Simply adhere the countertop foam in place using double-sided P.S.A tape and firmly press the foam into place. GlobMarble's Concrete Countertop Edge Rails can be used to form curved or straight wall sections. You can use the countertop Edge Rail Foam for pour-in-place or precast countertops.
High Density Precast Concrete Foram Rails 3/4"
Clear Facing Tape not included
- 112 Lineal Feet of 3/4" Foam Rails - 3/4" x 4 ft
Clear Facing Tape not included
- 112 Lineal Feet of 1" Foam Rails 1" x 4 ft
High Density Precast Concrete Foam Rails 1 1/2"
Clear Facing Tape not included
- 64 Lineal Feet of 1 1/2" Foam Rails - 1 1/2" x 4 ft
Clear Facing Tape not included
- 64 Lineal Feet of 2" Foam Rails - 2" x 4 ft
HOW DO YOU APPLY FORMING SYSTEM FOAM RAILS AND CLEAR FACING TAPES?
1. Make sure your casting surface is clean and clear of all dust and debris.
2. Remove the protective layer from the P.S.A. tape and apply tape to bottom of foam rail, keeping edge of tape even with the inside edge of the foam rail.
3. Cut to desired dimensions.
4. Remove second protective film layer and begin applying foam rails to casting surface as required.
5. Apply clear facing tape to span across the inside of all foam rails spanning across joints.
6. Remove protective film layer from clear facing tape.
7. Thoroughly clean the casting surface again with denatured alcohol or acetone before pouring in your casting mix
