Concrete Vibrating Motor 0.28 kW Power (110V, 220V)
Concrete Vibrating Motor Futures:
- IP65 protection requirements completely protected from any external contact, dust penetration, and splash water.
- 100% continuous operation is guaranteed, even when the equipment is operating at full centrifugal force.
- Vibrating motors vibration resistant and able to withstand temperatures up to 180°C.
- Long service life and very low concrete vibrator maintenance requirements.
- Lightweight concrete vibrating motor, small and large volume vibration, easy adjustment of vibrating force.
- Can be vibrating source for vibrating conveyor, vibrating feeder, vibrating screens, filter, concrete forms, vibrating polisher, vibrating drier and close-proof device for block during vibrating and more.
- Vibrating motors widely used in mining, metallurgy, coal industries, electric power, construction, chemical industry, casting, food and light industry and more.
- Vibrating force can be easily changed within the certain scope to satisfy various requirements.
Concrete Vibrating Motor 110 V Specifications:
Power: 0.28 kW.
Vibration: 2.9 kN.
Force: 300 kgf.
Voltage: 110 V 50/60 Hz.
Rotary Speed: 2840 rpm.
Currency: 3.1 A.
Install Size dia: 26 cm x 22 cm x 16 cm (11 x 9 x 7 in).
Weight: 8 kg (17.6 lbs).
Packaging: 27 cm x 23 cm x 17 cm (11 x 9 x 7 in).
Concrete Vibrating Motor 220 V Specifications:
Power: 0.28 kW.
Vibration: 2.9 kN.
Force: 700 lbs (300 kg).
Voltage: 220 V 50/60 Hz.
Rotary Speed: 2840 rpm.
Currency: 2.5 A.
Install Size dia: 26 cm x 22 cm x 16 cm (11 x 9 x 7 in).
Weight: 8 kg (17.6 lbs).
Packaging: 27 cm x 23 cm x 17 cm (11 x 9 x 7 in).
Frequently Asked Questions about Concrete Stamping Mats
Q: What type of speed controller can be used with this motor, or does i have variable speed?
A: Motor do NOT have speed controller. Motor comes with rower On/Off switch only. it ready to work, just plug in to out let and start working. Speed controller sold separately. We offer 2 types of speed controllers. 1 inexpensive router speed controller that can be used for small projects and manufactured for vibrating motors speed controller. See options.
Q: Making 10" x 2" table mounted on rubber tires to hold ~400lbs concrete molds. is 1 motor below middle table enough to vibrate concrete adequately?
A: 10 f. table is pretty long, i would recommend to use 2 motors to distribute vibration evenly over the table or get more powerful motor.
Q: Is it okay to mount the vibe on the underside of the table?
A: This is the best option to mount the motor. Motor has 4 Legs with pre-drilled holes especially for under table mounting.
Q: I am wanting to use this motor to build a vibrating table that is 6" x 7" that screen a waste water stream for debris. Would this motor work for that?
A: We tested the motors on 600 lbs cast. It will work on any size table if you'll make a solid frame to distribute vibration on whole table.
DIY Vibration Table For Concrete
Vibration Tables, Vibration Motors, Concrete Molds, Mold Release, Non-Aerosol Sprayer..
