PH901X AR Glass Fiber Reinforced Concrete Chopped Strands

PH901X AR Glass Fiber Reinforced Concrete Chopped Strands

Alkali Resistant Glass Fiber Reinforced Concrete


Fibers for concrete cement countertops, AR Glass Fiber GFRC Chopped Strands 1 LB

 

PH901X AR Glass Fibers is the heaviest strands of the of the leading fibers manufacturer Nippon Electric Glass America Inc.

PH901X Fiber Strand contains 200 filaments. 18 microns diameter of the filament provides your GFRC with the highest integrity and the most resistance to filamentization during mixing and processing.

19% or higher zirconia content provides excellent fiber alkali resistance and acid resistance.

Suitable for spray-premix

Perfect for mortar and concrete reinforcement applications; all decorative applications as countertops, fireplace surrounds.

Manufactured by NEG America Inc., Japan in compliance with ASTM C1666/C 1666M, EN 15422 and under recommendations of PCI and GRCA

Available in 13,19 and 25 mm (1/2”, ¾” and 1”) length.

 

Packaging

1 lb, 44 lb. 



FREQUENTLY ASKED QUESTIONS ABOUT ALKALI RESISTANT GLASS FIBERS:


IF I GRIND TO EXPOSE AGGREGATE, WILL THESE GLASS FIBERS SHOW IN THE SURFACE?
Yes, glass fibers will show up on surface if you’ll grind concrete surface unless you mix two batches and line your mold with about 1/2 to 3/4 in of the batch without the glass fibers. Also depends if you are doing cast in place or inverted. You can also torch the the alkali resistant fibers after grinding. 

HOW MUCH GLASS FIBER I NEED FOR GFRC CONCRETE COUNTERTOP CASTING 
It really depends to your preferences or casted product, but average alkali resistant fibers to GFRC concrete ratio is between 1 to 3% by total concrete weight.  For 100 lbs of GFRC concrete you need between 1 to 3 lbs of glass fibers. Always make a test prior casting actual product. Standard concrete ratio 1 1/2 to 3 lbs per cubic yard 

Write a review

Note: HTML is not translated!
    Bad           Good

  • Product Code: PH901
  • Availability: In Stock
  • $7.50

Available Options

Stone Veneer Molds. VS 701/1, VS 701/2, VS 701/3, VS 701/4, VS 701/5, VS 701/6 Mold size ..
$164.00

Old Brick Stone Molds Old Brick Stone Mold BS 611/1, BS 611/2, BS 611/3Mold size — 3 SQ.FT.(0.2..
$64.00

White Concrete PigmentTitanium Dioxide White Colors for Concrete.   SELECT COLO..
$7.99

CONCRETE MOLD RELEASE - G-1CONCENTRATED 30:1 FORMULAOur Concrete Mold Release soluble concrete relea..
$23.00

Stone Veneer Molds VS 101/1 Mold size — 3,34 SQ.FT(0.31m2). approximate.Measurements - 23” X 21..
$164.00

   PAVER STONE PLASTIC MOLDS  There are different mold models but it is the sam..
$14.99

Color Pack for Decorative Concrete - Xtreme PreCast Mix - 0.5 lb (0.23 kg) from SureCreteConcre..
$3.85

Water-Based Concrete Stain-Eco-Stain Semi-transparent Concrete Stain from SureCrete (10 lb / 4...
$60.00

Concrete Countertop Molds Edge Form CEF 7010Concrete Countertop Molds Edge Forms are used ..
$45.00

Concrete Oxide PigmentOxide Concrete Colors for Concrete. 1Lb-(0.45kg) Mix Ready bag. Photos of..
$5.30