-
Your shopping cart is empty!
Countertop edge forms are used to create a decorative edge on your concrete countertops or sinks. The estimated mold life is 2000 castings with proper storage and use. Always use a release agent (We recommend G-1 Release) and store face-up on a flat surface in a cool, dry location out of direct sunlight. While using the molds outside, throw a tarp over them or keep them out of direct sunlight. UV radiation severely damages the molds.
GlobMarble Concrete Countertop Edge Forms are used to change the shape of a concrete element edges such as concrete countertops, stairs, vanities and table tops, great for pool coping, and step liners.
GlobMarble Concrete Countertop Edge Forms are made from industrial grade manufactured in USA urethane rubber that with proper care will offer a lifetime of use. Edge Forms should be stored flat in cool dry areas out of direct sunlight.
Our Concrete Countertop Edge Forms can be used on melamine or plywood to form any countertop or table shape or wrapping around the corners. Edge Forms are usually used in conjunction with melamine supports or wood supports to provide backing and structure for the mold. Simply attached the mold to backing support with double sided tape. Concrete Countertop Edge Forms length can be easily trim with a standard razor knife. Cut each on in a 45 degree angle when two molds meet in an inside corner.
GlobMarble Edge Forms are reusable and available in 8 ft lengths- 2" high x 96" lengths. (5 cm x 245 cm) approximately. Please refer to form description for particular form dimensions.
Click here: for GlobMarble Concrete Countertop Edge Form Set Up and Usage.