- Stock: In Stock
- Model: SM 7002
Made in USA
Available Options
The SM 7002 Smooth Keystone Paver Concrete Stamps create a clean, interlocking paver pattern with completely smooth, textureless faces. Unlike conventional textured concrete stamps, SM 7002 produces no decorative stone grain or surface texture on the individual pavers, resulting in a smooth tile-like impression.
Each 31" × 21" concrete stamp imprints 12 textureless Keystone Pavers at once.
Product Specifications
- Pattern Type: Smooth Keystone Paver
- Stamp Size: 31" × 21"
- Pattern Layout: 12 Keystone Pavers per stamp impression
- Paver Design: Each Keystone Paver consists of one 6" × 6" hexagonal stone and one 4" × 4" square stone
- Surface Texture: Completely smooth, with no decorative texture
- Material: Durable polyurethane rubber
- Stamp Options: Rigid with handles and Flexible without handles
Available Sets
4-Piece Set
- 3 Rigid Concrete Stamps
- 1 Flexible Concrete Stamp
8-Piece Set
- 7 Rigid Concrete Stamps
- 1 Flexible Concrete Stamp
The rigid stamps cover the main stamping area, while the flexible stamp is used along edges, walls, and other locations where a rigid stamp cannot be positioned.
Technical Specifications
| MODEL: | SM 7002 |
| Recommended Touch Up Wheel: | Flat 1/4" Smooth |
| Grout Line Width: | 1/2" |
| Grout Line Depth: | 1/4" |
| Recommended Overlay Thickness: | 3/8" |
| Permitted Rotation: | 180° |
| All measurements are approximate and may vary by measurement method and manufacturing tolerances. Minor dimensional variations that do not affect product performance are not considered defects and are not covered under warranty. | |
Rigid and Flexible Concrete Stamps
Rigid Concrete Stamp
The rigid SM 7002 stamp is designed for stamping open concrete areas while maintaining consistent Keystone Paver alignment and grout line definition. Its smooth paver faces create the pattern without adding decorative surface texture.
Flexible Concrete Stamp
The flexible SM 7002 stamp is designed for use along walls, edges, columns, and other restricted areas where a rigid stamp may not fit. It reproduces the same Keystone Paver pattern and smooth surface finish as the rigid stamp.
Residential Applications
SM 7002 Smooth Keystone Paver Concrete Stamps can be used to create decorative concrete surfaces for:
- Patios and outdoor living areas
- Residential driveways
- Sidewalks and garden pathways
- Courtyards and entryways
- Decorative concrete slabs
The interlocking pattern creates the appearance of individual pavers while maintaining a smooth, untextured finish across their faces.
Commercial and Municipal Applications
The SM 7002 pattern is also suitable for decorative concrete installations in:
- Commercial courtyards
- Building entrances
- Pedestrian walkways
- Public plazas
- Decorative paved areas
Government purchasers: GlobMarble is registered in SAM.gov.
Stamp Placement Instructions
- Plan the layout. Dry-fit the stamps before beginning to confirm the pattern alignment and determine the starting position.
- Establish a straight first row. Position the first row of stamps along a straight reference line to maintain consistent pattern alignment.
- Stagger the next row. Offset the following row approximately halfway to maintain the interlocking Keystone Paver layout.
- Maintain consistent grout lines. Align adjacent stamps carefully to preserve the pattern and avoid visible transitions.
- Rotate stamps only 180°. The SM 7002 pattern permits 180° rotation for placement.
- Finish edges and details. Use the flexible stamp where necessary and a Flat 1/4" Smooth Touch Up Wheel to refine grout lines as needed.
Frequently Asked Questions
Q: What is the difference between SM 7000 and SM 7002?
A: Both models feature the same interlocking Keystone Paver pattern, stamp dimensions, and grout line geometry. SM 7000 has a coarse, non-slip surface texture, while SM 7002 has completely smooth paver faces with no decorative, slip resistant texture.
Q: Can SM 7002 be used with concrete overlays?
A: Yes. The recommended overlay thickness is approximately 3/8", subject to the overlay manufacturer's installation requirements and the conditions of the project.
Q: Does SM 7002 require a matching texture skin?
A: No. SM 7002 leaves the concrete surface with the same finish you gave it before stamping, so there is no need for a matching touch-up skin.
Shipping:
Processing time: 1–2 business days.
Carriers: UPS & FedEx.
Worldwide shipping from Brooklyn, NY.
Returns:
30-day return policy for unused items.
Money-back guarantee if the product is defective.
Customer pays for return shipping unless the item is damaged.
Reviews
Please leave a review
Write Review