One Day Pigmented Polyaspartic Coating For Flake Floor System-PFC-280
Dura-Kote PFC-280 from SureCrete
ONE DAY PIGMENTED POLYASPARTIC FLAKE FLOOR SYSTEM
Create a beautiful flake floor in just one day!
Dura-Kote PFC-280 -
It’s a specially formulated 88% solids, hybrid solvent based pigmented polyaspartic.
A high performance coating with a user-friendly pot life of approximately 10 minutes and the ability to create a moderate build (7 mil cured) base coat for full broadcast flake system.
Provides a low VOC, penetrating, film forming, high gloss, UV stable, fade resistant pigments for a colored base coat on a flake floor system.
Dura-Kote PFC-280 is ideally suited for both commercial and residential coatings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.
The ability to create a beautiful flake floor in just one day can open many doors in terms of not only project locations but also scope. Turnaround time for a floor may be as little as 6 – 8 hours. It’s a great opportunity for large number of contractors to finish their project in just one day. Please note: for professional use only.
Dura-Kote PFC-280 + Dura-Kote Flakes + PFC-120
Optional: Sure Finish (provides a protection, slip resistance) or Sure Grip (Non Slip Sealer Additive HD)COVERAGE Varies upon substrate: approximately 150 - 200 ft² per gal. (14 -18.5 m² per 3.8 liter) 8 – 11 mils wet; 7 – 9.7 mils cured
Ready for recoat - 2-3 hours (6-8 hours at low temperatures)
Light Duty Use 4-6 hours (Up to 24 hours at low temperatures)
Heavy Traffic Ready - 2-3 hours (6-8 hours at low temperatures)
Full Cure - 48-72 hours (Up to 7 days at low temperatures)
Apearance (cured) - Colored Gloss Sheen