3 Jet Downward Concrete Sprayer
3 Jet Downward Concrete Sprayer
Cement Sprayer for GFRC Concrete Mortar, Stucco or Paster
This sprayer is designed for downward horizontal applications including GFRC countertops, molds, panels, columns and floors. This Stucco Sprayer is made in the USA, this high quality pneumatic hand tool is manufactured from the highest quality materials and designed with comfort and durability in mind. The stainless steel hopper is extremely durable and easy to clean. The extension handle and hopper handle are designed to give you a stronger grip, good control, balance and comfort while you are applying material.
Stucco sprayer cuts work time dramatically and you have the choice to use 1, 2 or 3 jets. This allows the sprayer to work efficiently with smaller compressors and makes detail work easier.
It comes with two sizes of jets and the accessories to adjust it to various application needs. The handle can be used short for confined spaces and long for best comfort.
We recommend a 7 cfm @ 90 psi compressor but many of our users have been happy with their smaller 110 volt compressors by adjusting the jet configuration to match their compressor. Larger air storage tanks (20+ gallons) are also a helpful thing.
Accessories – The Single Hole Plate is available as an additional accessory. This plate can be used to replace the standard 3-hole plate for a more directed spray pattern.
Stucco Sprayer Features:
- Stainless steel hopper for maximum durability
- Interchangeable jets
- Use 1, 2 or 3 Jets at a time
- Jet cleaning tools
- Powder coating with carbide grit on handles for better grip and control
- Proudly made in the USA
How to Assemble
Concrete sprayers are designed to make work easier and more efficient, to get started once you’ve purchased your sprayer it’s quite simple to assemble and get to work…
1) Each concrete sprayer will come with 3 main parts and a few accessories. The main components of each concrete sprayer are the hopper, air tube and trigger. Assemble your concrete sprayer by screwing the green air tube into the hopper and then screw the trigger into the green air tube. You can put your concrete sprayer together without the green air tube as well for use in tight spaces.
2) Once the sprayer is assembled you’ll find that you can use it with the green air tube angled down or up, depending on the direction you’re sprayer you’ll find one setting is more comfortable than the other.
3) Connect your concrete sprayer to your air compressor via the 3/8″ or 1/2″ inside diameter hose you should have with your compressor. The trigger on your concrete sprayer comes with a CP5 connection, make sure your hose fitting is the correct size or purchase an adapter which can be found at any standard building supply store.
4) Once your concrete sprayer is connected to your compressor work can begin, simply place your mix into the hopper by scooping it from a wheelbarrow or hand shoveling in from your mixer or bucket.
How to Clean
Keeping your tools clean is good practice for any professional. That’s no exception for the concrete sprayers. While using your concrete sprayer be sure to place it in a 5 gallon bucket of clean water throughout the day when you take a break or stop using it for any length of time. At the end of the work day be sure to hose the concrete sprayer down, disassemble the front plate and remove all the cementitious mix from the inside, outside, air tube and handle. Before you begin work with your concrete sprayer the following day, be sure to use the included cleaning tools to remove any mix that may remain inside the brass jets at the front output holes. If you feel air pressure blowing out around the trigger of the concrete sprayer you most likely have some dried mix blocking the front of the concrete sprayer output area.
This is a universal tool, can be used as Stucco Sprayer, GFRC Concrete Sprayer, Mortar Sprayer or Plaster Sprayer.