Stepping Stone Mold Wood Grain WS 5010, 18" x 17"

Stepping Stone Mold Wood Grain WS 5010, 18" x 17"

To have a wider stone pattern variety we recommend these molds together:

Stepping Stone Molds Wood Grain WS 5010/1

Mold size 3.22 SQ.FT(0.20m2) approximate.
Measurements - 17” X 18” X 2 1/4”  (43cm X 46cm X20cm)
Mold's sections — 3.
Section dimensions:
Approx. size of each section 15.7” X 5 1/4” x 1 3/4" (40cm X 13 cm x 4.5cm). 

  

Stepping Stone Molds Wood Grain WS 5010/2

Mold size 0.73 SQ.FT(0.068m2) approximate.
Measurements - 15.7” X 6 3/4” X 2” inch (40cm X 17cm X 5cm)
Mold's section — 1.
Approx. size of each section 15” X 6 3/4” x 1 3/4" (40cm X 13 cm x 4.5cm)

 

How to Make Concrete Stone Instruction


WS 5010/1 Stone-casting Instructions:

Always apply release agent to your mold prior to casting concrete.
WS 5010/2 mold casting weight is about 11.42 lbs. (5.19 kg.)
We use this 1:2 cement to filler ratio mix : (you can also mix 1-part Portland cement to 3 parts sand [filler], but plasticizer and water has to be re-calculated by cement weight)
8.32 lbs (3.78 kg) Portland cement (white for light stone colors, gray for dark stone colors)
16.65 lbs (7.56 kg) Sand (20-30 mesh recommended. Silica sand or "all-purpose" sand works great)
33.29 oz (0.91 L) Water (We recommend water to be 20%-30% of cement weight.) (If your mix is too liquid, use less water.)
0.33 oz (37.79 g) Super-plasticizer (Superplasticizer's dosage rate is 0.5% -1% of cement weight. We are using 1%)
For best result always add dry pigments to your mix prior to adding the water. Mix concrete with pigment and additives for a few minutes, then add water (mix at least 3-5 minutes). You can also add Super plasticizer to the water 10-15 minutes prior to casting, then mix with dry ingredients.
Please note: Concrete minimum mixing time is 3 minutes (it takes a few minutes until Super Plasticizer absorbs into the cement and start reaction)
To color different molds sections, brush oxide pigment over the  selected sections, then cast the concrete.
Cover the mold with plastic while it is curing. Remove the stone from the mold in 12-24 hours



  WS 5010/2 Stone-casting Instructions:

Always apply release agent to your mold prior to casting concrete.
WS 5010/2 mold casting weight is about 10.22 lbs. (4.64 kg.)
We use this 1:2 cement to filler ratio mix : (you can also mix 1-part Portland cement to 3 parts sand [filler], but plasticizer and water has to be re-calculated by cement weight)
3.41 lbs (1.55 kg) Portland cement (white for light stone colors, gray for dark stone colors)
6.82 lbs (3.09 kg) Sand (20-30 mesh recommended. Silica sand or "all-purpose" sand works great)
13.63 oz (0.37 L) Water (We recommend water to be 20%-30% of cement weight.) (If your mix is too liquid, use less water.)
0.55 oz (15.47 g) Super-plasticizer (Superplasticizer's dosage rate is 0.5% -1% of cement weight. We are using 1%)
For best result always add dry pigments to your mix prior to adding the water. Mix concrete with pigment and additives for a few minutes, then add water (mix at least 3-5 minutes). You can also add Super plasticizer to the water 10-15 minutes prior to casting, then mix with dry ingredients.
Please note: Concrete minimum mixing time is 3 minutes (it takes a few minutes until Super Plasticizer absorbs into the cement and start reaction)
To color different molds sections, brush oxide pigment over the  selected sections, then cast the concrete.
Cover the mold with plastic while it is curing. Remove the stone from the mold in 12-24 hours

    Title Stepping Stone Mold Wood Grain WS 5010, 18" x 17"

    4 Rating 1 Review

    • Product Code: WS 5010
    • Availability: In Stock
    • $113.40

    Available Options

    CONCRETE MOLD RELEASE - G-1CONCENTRATED 30:1 FORMULAOur Concrete Mold Release soluble concrete relea..
    $23.00

    Premium Acrylic Concrete Sealer HS-200 From SureCreteClear Stamped Concrete Driveway And Pool Deck S..
    $61.40

    Concrete admixture-Water reducer-Super plasticizer High-performance superplasticizer for cement bas..
    $21.78

    CSA Cement Fast Setting Additive 50 Lbs   GlobMarble CSA Cement is a cementitious po..
    $38.80

    Concrete Oxide PigmentOxide Concrete Colors for Concrete. 1Lb-(0.45kg) Mix Ready bag. Photos of..
    $5.91

    Non-Aerosol Sprayer for Release AgentThe Non-Aerosol sprayer is an economical alternative to aeros..
    $68.30

    Paver stone molds  PS 22106/RThere aredifferent mold models but it is the same Mold style. If ..
    $38.56

    Mosaic Stone Mold Mosaic Stone Mold MS 821/1Mold size — 2 SQ.FT.(0.18m2) approximate. Measurem..
    $102.06

    Limestone Mold Jerusalem Stone  Mold size 3.44 SQ.FT(0.32m2). approximate. Measurements - 25” ..
    $204.37

    Color Pack for Decorative Concrete Overlay and Casting Products - 0.5 lb. (0.23 kg) Concrete co..
    $5.70

    Concrete Countertop Molds Edge Forms are used to change the shape of the edges of a concrete element..
    $56.70

    Water-Based Concrete Stains-Eco-StainSemi-transparent Concrete Stains from SureCreteSemi-Transparent..
    $85.10

    White Concrete PigmentTitanium Dioxide White Colors for Concrete.   SELECT COLO..
    $10.29

    Stamped Concrete Colored Powder Concrete Release Agent From SureCreteDescriptionConcrete Powder Rele..
    $95.29